Standards and charge
China inspection Services pre-shipment quality assurance check Standards and charge
China Inspection Services - Charge
The inspection charge is quoted on a man-day basis. The number of man-days involved depends on the product complexity, shipment quantity, inspection location and specification requirements. Additional expenses such as traveling, accommodation will be charged separately.
Manday means one inspector works a day (8 hours). How many mandays we need depend on the product complexity, and inspection sample size which need random inspection. Traveling cost will be reimbursed for actual expenses. So for exact quotation, we need to know the product, product quantity and factory location.
That is total inspection fee = manday rate + traveling cost + hotel (if needed).
Standards
CIS Inspection uses the recognized international quality control standards to conduct inspections. We refer to the most widely accepted sampling methods such as MIL-STD-105E, ABC-STD-105, ISO2859, DIN40.080, BS6001, NFK06-021/022.
Unless otherwise instructed, CIS Inspection uses the Single Sampling Plan Normal Level II (according to the MIL-STD 105E standard). This is generally the common requirement for products manufactured in China.
The following AQL (Acceptable Quality Level ) are usually applied by CIS Inspection unless otherwise instructed by the client:
|
High valued products |
Low valued products |
Critical defects |
no critical defect is accepted |
no critical defect is accepted |
Major defects |
AQL 1.5 |
AQL 2.5 |
Minor defects |
AQL 2.5 |
AQL 4.0 |
|
